Have you decided to remove the carpets from your home? And are you fed up with the old-style carpets? So, it would be best if you went for wood flooring; it will look more sophisticated and easier to clean. Removing the carpet is a relatively easy project which you can generally accomplish in a day or two on your own; however, it depends on the size of your house.
These days people are more inclined towards carpet tiles, wood flooring, luxury vinyl flooring, and many other modern options instead of cheap, old-fashioned carpets.
If you are planning to revamp your home or office? But you are not sure which is the perfect place to buy wood flooring, luxury vinyl flooring, or carpet tiles in Manchester. You should check out Floor Express; they are the leading brand in the UK and have a variety of options for flooring.
Below, you will find the way to remove carpet and install wood flooring, whether you are going to install it on your own or contact any floor installation companies for the service. It will help you to understand the complete process.
05 Steps to Remove the Carpet on Your Own
1. Clear the Space & Use Protective Gear
Firstly, you need to make space in the room by clearing all the furniture. Secondly, take down the doors that open into the room, including bi-folds.
Then ensure that you take all the precautionary measures like; pair of safety gloves, knee pads, and a face mask if you are sensitive to dust particles.
2. Separate the Carpet from Tack Strip
The carpet is kept in place by tack strips, so to detach the rug, you have to follow this trick; first, you have to pick a corner, then grab the carpet with a pair of pliers, and pull it towards you.
However, there are two possibilities that you’ll face while separating the carpet;
If it comes up easily, grab it with your hand and continue pulling it up.
Or if it’s not coming up easily, you have to use a knife to cut a 6-inch square in the corner to remove the piece and then pull it up by hand.
3. Cut the Carpet into Strips
Pull back approximately 03 feet of carpet and use the knife to cut it into strips. Also, you can cut it from the back because it provides an easier surface to work with than the front.
Now roll up all the cut pieces and secure them with the help of duct tape. Keep removing the carpet in this way.
4. Detach the Carpet Pad
Then you have to remove the carpet padding and follow the same steps as for removing the carpet. However, the padding is generally easy to handle and much lighter than the carpets.
You might need the sharp-bladed floor scraper to remove the chunks from the concrete, particleboard, or plywood. Also, you need to remove the staples with the help of specific tools.
5. Remove the Tack Strips
After carpet removal, you must examine the tack strips all over the room. If they are in satisfactory condition, you can leave them in place to install the brand-new carpet. But if they are not in good shape, you can discard them as soon as possible.
For new carpeting, you should look for cheap carpets in Manchester from Floor Express, because they don’t have cheap rugs and yes they are reasonable in terms of cost. You can also coordinate with them for the price to remove the carpet and install wood flooring.
If you plan to replace the old-fashioned with modern carpets, make sure that you use top-quality carpet underlay from the UK this time.
How to Install the Wood Flooring?
Solid wood flooring is rich and attractive in terms of appearance for your home or office. It gives a sleek look and adds significant value to interior styling. It is suggested to you that wood flooring is perfect for the living room, kitchen, bedroom, or dining room.
You can even contact Floor Express, as their team knows the fundamental techniques to follow while installing wood flooring. However, you can follow the below-mentioned step if you are doing it on your own.
- Prepare the area, and remove the old carpet or furniture.
- Countersink the nails with the help of the nail punch. For the remaining hole, fill them with the matching putty.
- Fit and lock all the boards, but make sure they all are tightly linked to each other.
- Use the flooring nailer, but it can’t be used until two to four rows have been installed.
- At the end of the installation, if you find any spacing, use the matching putty.
- Lastly, you must install the transition pieces per the manufacturer’s instructions.
It’s highly recommended to all our readers who call Floor Express, who are Manchester’s leading flooring products and installation suppliers. The whole process of removing carpet and installing wood flooring won’t be that easy, but if you find this write-up valuable, do let us know in the comments below.